Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 120)

Configuring Units
108 3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Figure 49. Asterisks Next to Selected Drives
2 After all drives for the unit are selected, Tab to the Create Unit button
and press Enter .
3 On the 3ware Disk Array screen, make sure that the proper drives are
listed.
Figure 50. Create Disk Array Display
4 (Optional) Press Enter and type a name for the unit; then press Enter
again to set the name.
Tip: If you want to use all available drives, press Alt-A to select
them all.
Tip: You can also press Alt-C to choose Create Unit.