Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 342)

Software Installation
330 3ware SAS/SATA RAID Software User Guide, Version 9.5.1
The install file name will be one of the following, depending on your
operating system and processor type.
./setupLinux_x86.bin -console
./setupLinux_x64.bin -console
3 After you press Enter , the application starts in text mode.
4 Respond to each screen as it walks you through the installation process.
The Console installation screens mirror those that display using the GUI
installer. For specific information about the screens, see the previous
section in this chapter.
To navigate in text mode, type:
1 for Next
2 for Previous
3 to Cancel
5 to Redisplay
0 to Continue Installing
Tip: You can now access the documentation through the 3ware HTML
Bookshelf. Open your browser and enter
/opt/AMCC/Documentation/index.html.
For more information, see “Using the 3ware HTML Bookshelf” on page xi.
Installing Software on FreeBSD
3ware RAID controller management software includes 3DM 2, CLI
(Command Line Interface), and the 3ware HTML Bookshelf.
This section includes these topics:
• Installing Software on FreeBSD 6.x or 7.x and later from the Command
Line
• Installing Software on FreeBSD 5.x
For more information, see Appendix B, page 277 in the 3ware SAS/SATA
RAID Software User Guide, Version 9.5.
Note: FreeBSD 5.x does not support the Java-based installer used by AMCC. In
order to use the 3ware management software, 3DM and CLI need to be installed
manually. See “Installing Software on FreeBSD 5.x” on page 331