EMC QLogic - Manual (Page 29)

2
Installing the HBA Driver 2-17
Installing and Configuring the HBA Driver
10. Enter the path to the diskette containing the driver (for example,
A:\ ), then click OK.
11. Select the appropriate QLogic HBA from the list of drivers that
appears; then click Next.
12. Click Next in the next window.
13. Click YES to continue the installation.
14. Click Finish to complete the driver installation.
15. The system requests that you reboot the system. Select NO and
click Close.
16. The system again requests that you reboot the system. Select NO
again.
17. If there are other QLogic HBAs installed, repeat steps 5 through
16 until all adapters have been installed.
18. Reboot the host.
QLogic_Windows.book Page 17 Thursday, March 10, 2005 10:31 AM