EMC QLogic - Manual (Page 75)

Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE) 4-1
4
Invisible Body Tag
The QLA4010/4010C is an iSCSI HBA that provides PCI connectivity
to SCSI using the iSCSI protocol. iSCSI enables IP-based SANs,
which are similar to Fibre Channel SANs. The QLA4010/4010C HBA
implements TCP/IP protocol on the HBA and off-loads the host of
any I/O protocol processing. This type of adapter also is called a
TCP/IP Offload Engine (TOE) adapter. Off-loading the host frees the
system to perform other tasks and optimizes system performance.
◆ Installing the HBA Driver.................................................................4-2
◆ Windows 2003 STORPort Updates ..................................................4-2
◆ Updating the HBA Driver in a Windows 2000 or Windows 2003
Host ......................................................................................................4-4
◆ Using the QLogic iSCSI SANSurfer Application to Configure
iSCSI Devices ......................................................................................4-6
◆ Using the QLogic iSCSI SANSurfer Application to Configure
iSCSI Devices ......................................................................................4-6
◆ Configuring iSNS settings for QLA4010.........................................4-8
◆ Installing and Configuring the QLA4010 iSCSI HBA to boot from
an EMC Storage Array ....................................................................4-14
Installing and
Configuring the
QLogic QLA4010 iSCSI
HBA (TOE)
QLogic_Windows.book Page 1 Thursday, March 10, 2005 10:31 AM