EMC QLogic - Manual (Page 31)

2
Updating the HBA Driver in a Windows 2000 or Windows 2003 Host 2-19
Installing and Configuring the HBA Driver
12. If prompted, click Yes to continue the installation.
13. Click Finish to complete the installation.
14. If the system requests that you reboot the system and you have
other adapters to update, select NO; then click Close.
15. If the system again requests that you reboot the system and you
have other adapters to update, select NO; then click Close.
16. If you have other adapters to update, select the next adapter
under SCSI & RAID Controllers and repeat steps 6 through 15.
When all adapters have had their drivers updated, select Yes to
the
reboot prompt.
QLogic_Windows.book Page 19 Thursday, March 10, 2005 10:31 AM