Elation Professional 60TM - Manual (Page 10)

Design Wash LED 60™
©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com
1. LED Assembly – 60 Philips Rebel LEDs comprise the LED assembly. 22 Red, 17
Green, 15 Blue, and 6 White.
2. Yoke Assembly – This assembly consist of the electronics and motors that control the
tilt movement as well as the LED operation.
3. Base Assembly – The base assembly holds and protects all the relative electronics.
Avoid bruit force to base as this may seriously effect the operation of this fixture.
4. Carrying Handle – Please use this intergraded handled to move the fixture form
location to location. Never carry the fixture by the head.
5. LCD Menu Display - 4-segment menu display. Used to display the DMX address as
well as all other menu functions.
6. Menu Button - This button is used to access the menu functions.
7. Up Button – The up button is used to toggle forward through the menu functions and
settings.
8. Down Button – The down button is used to toggle backwards through the menu
functions and settings.
9. Enter Button – The enter button is used to enter in to a certain menu function or to lock
a function into memory.
10. Control Board Assembly – The control board assembly consist of the LCD menu
display, the menu function buttons.
11. Cooling /Fan Assembly – The back of the head consist of the fan and cooling fin
assembly. To prevent the fixture from overheating, never block the back of the head
during normal operation.