Elation Professional 60TM - Manual (Page 25)

Design Wash LED 60™
©Elation Professional, Los Angeles Ca. 25 www.ElationLighting.com
Tilt Reverse - This function allows you to invert all tilt movements. Use the Up and
Down buttons to turn this function On or Off. Press the Enter button to accept the
change or the Mode button to cancel and return to the main menu. This function is
“OFF” by default.
Fine Resolution – This function changes the DMX channel operation from 8bit (11
channels) to 16bit (13 channels). This function is “on” by default, which allows for the
“Pan Fine” and “Tilt Fine” channels to be accessed. When this function is turned off
the fixture will operate without access to the “Pan Fine” and “Tilt Fine” DMX channels,
thus reducing the overall DMX channels needed to operate the unit to 13.
Pan Degree – This function changes the maximum Pan resolution from either 540˚
or 630˚. The default function is 540˚. 630˚ operation allows for greater coverage, but
slower pan movement.
Feedback – This function turns the feedback correction on or off. This function is set
to “ON” as default. This function allows for automatic pan and tilt correction in the
event either one disrupted during normal operation.
Movement Speed – This function changes the speed function of the Pan and Tilt
motors. Use this function when intergrading Design Wash LED 60 ™ into lighting rigs
that included Design Wash 250 ™ s and Design Spot 250 ™ s. There are 3 different
mode variations;
Speed 1 (Default): Slower than the original Design Spot 250 for smoother, more
precise movements.
Speed 2: Pan and Tilt speeds are identical to the first generation Design Spot
250.
Speed 3: includes a faster Pan speed. Pan speed is 0.5 seconds faster than
original Design Spot 250. Tilt speed will be the same as speed 2.
Mic Sensitivity – This function makes the internal microphone more or less