Elation Professional 60TM - Manual (Page 28)

Design Wash LED 60™
©Elation Professional, Los Angeles Ca. 28 www.ElationLighting.com
customer support team for step-by-step instructions.
8.7 User Mode Set:
8.7.1 User Mode - This function allows the DMX channels assignment to be changed
from the default value of 13, to either 8bit/11 channels or extended mode at 13
channels. This function also allows the user to create user defined channel orders
allowing the fixture to match the channel order of other fixtures on the market for
easier operation. A total of three user modes may be configured: User Mode A,
User Mode B, and User Mode C:
8.7.2 Edit User mode – This function allows the user to make the actual changes in the
user-defined modes that are created in the previous function.
8.8 EDIT PROGRAM: - The fixture comes equipped with a built-in DMX recorder that allows
custom programs to be installed and recalled directly from the fixture’s control board.
Programs can be created and stored using the fixture’s control board or by using an
external DMX controller. For detailed instructions on how to complete this task please
see Section 11/ Page 34.
8.8.1 Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in “Function Mode”
under “Program Run.”
8.8.2 Edit program – This function allows the user to edit the built-in programs.
8.8.3 Edit Scenes – This function allows the user to edit or define the actual scenes
that are stored in the user defined built-in programs that are accessed in the
previous step.
8.8.4 Rec Controller - The Design Wash LED 60 ™ features an integrated DMX
recorder. Pre-programmed scenes can be transmitted to the fixture via any DMX
compliant controller. This function allows those scenes to be stored in to the
fixture’s built-in memory and then subsequently used to create the user-defined
programs.