ProSoft Technology 5204-DFNT-PDPMV1 User Manual
Page 42
Configuring the Gateway
DFNT ♦ ProLinx Gateway
Protocol Manual
EtherNet/IP Explicit Messaging Client/Server
Page 42 of 124
ProSoft Technology, Inc.
July 24, 2013
3.4
[DFNT UClient 0]
This section defines the configuration for the unconnected master device
simulated on network port
3.4.1 Minimum Command Delay
0 to 65535 milliseconds
This parameter specifies the number of milliseconds to wait between the initial
issuances of a command. This parameter can be used to delay all commands
sent to servers to avoid "flooding" commands on the network. This parameter
does not affect retries of a command as they will be issued when failure is
recognized.
3.4.2 Response Timeout
0 to 65535 milliseconds
This is the time in milliseconds that a Client will wait before re-transmitting a
command if no response is received from the addressed server. The value to use
depends on the type of communication network used, and the expected
response time of the slowest device on the network.
3.4.3 Retry Count
0 to 10
This parameter specifies the number of times a command will be retried if it fails.