Kodak i2420 - Manual (Page 15)

A-61677 November 2016 9
Connecting the power cord
and USB cable When the drivers have been installed, connect the power cord and USB
cable to the scanner. Refer to the illustrations below for making proper
connections. Make sure the power outlet is located within 1.52 meters
(5 feet) of the scanner and is easily accessible.
1. Select the appropriate AC plug converter from those packed with
your scanner.
2. Slide the plug converter into the power supply.
3. Plug the power cord into the power port on the scanner.
4. Plug the power supply into the wall outlet.
5. Attach the USB cable to the scanner USB port, located on the back
of the scanner.
6. Attach the other end of the USB cable to the proper USB port on
your PC.