Using the projector, Menu navigation and features – Optoma DS349 User Manual
Page 21
English 21
UsInG THE PRoJECToR
menu navigation and features
The projector has multilingual on-screen display menus that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect the source.
To open the OSD menu, press
1.
on the remote control or the projector keyboard.
When OSD is displayed, use
2.
keys to select any item in the main menu. While making a selection
on a particular page, press
or
key to enter sub menu.
Use
3.
keys to select the desired item in the sub menu and then press
or
key to view further
settings. Adjust the settings by using
keys.
Select the next item to be adjusted in the sub menu and adjust as described above.
4.
Press the
5.
or
to confirm, and the screen will return to the main menu.
To exit, press the
6.
or
again. The OSD menu will close and the projector will automatically save
the new settings.
Sub Menu
Main Menu
Settings
Navigation guide
Display
Image Settings
3D
Aspect Ratio
Edge Mask
Zoom
Image Shift
Keystone
Select
Exit
Enter