Optoma DS349 - Manual (Page 42)

English 42
UsInG THE PRoJECToR
High altitude
When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin.
Display mode lock
Choose “On” or “Off” to lock or unlock adjusting display mode settings.
Keypad lock
When the keypad lock function is “On”, the Keypad will be locked. However, the projector can be operated by the
remote control. By selecting “Off”, you will be able to reuse the Keypad.
Information Hide
Enable this function to hide the information message.
one: ‡ Choose “On” to hide the info message.
offe: ‡ Choose “Off” to show the “searching” message.
logo
Use this function to set the desired startup screen. If changes are made, they will take effect the next time the
projector is powered on.
Defaulte: ‡ The default startup screen.
neutrale: ‡ Logo is not displayed on startup screen.
background Color
Use this function to display a blue, red, green, grey color, none, or logo screen when no signal is available.
setup reset all menu
Reset
Return the factory default settings for Setup menu settings.
Info menu
Info menu
View the projector information as listed below:
Regulatory ‡
Serial Number ‡
Current Input Source ‡
Resolution ‡
Refresh Rate ‡
Projector ID ‡
Display Mode ‡
Power mode(standby) ‡
Brightness Mode ‡
Filter Hours ‡
Lamp Hours ‡
FW Version ‡