Kaon HD 3000 - Manual (Page 39)

39 - ENG
7.4 Remote Control TV Setting
7.4.1 Checking the Set-Up Code
1. Press the TV STANDBY button with OK button on the remote control for 2 seconds to covert to Setting Mode.
 It will convert to the Setting Mode after the LED is on.
2. Press the INFO button.
 Set-up code will blink in oder as number of 100 digits, 10 digits, 1 digits. (Only 0 is blink 10 times.)
7.4.2 Using the Three Digit Code
1. Press the TV STANDBY with OK button on the remote control for 2 seconds to convert to Setting Mode.
 It will convert to the Setting Mode after the LED is on.
B
Setting mode will be exited if no input is made for more than 20 seconds.
2. Point the remote control toward the TV.
3. Find the 3-digit code for your manufacturer on the list below, and enter the code by using the number buttons.
 The LED will blink once each time you enter the number.
4. Press the OK button to finish.
 The LED will blink 2 times and becomes "Off" status.
B
Some buttons may not work.
7.4.3 Using the Auto Search (TV CH+/-)
1. Press the TV STANDBY with OK button on the remote control for 2 seconds to convert to Setting Mode.
 It will convert to the Setting Mode after the LED is on.
B
Setting mode will be exited if no input is made for more than 20 seconds.
2. Point the remote control toward the TV.
3. Press the TV CH + or - button.
 The LED will blink once each time you press the button.
4. Press the OK button to finish.
 The LED will blink 2 times and becomes "Off" status.
B
Some buttons may not work.
7.4.4 Resetting the TV to the Factory Defaults
Press the TV STANDBY with  (Record) button on the remote control for 5 seconds.
 After the LED blinks 5 times, resets all settings to the default values.