Roland RP107 88-Key Digital Piano (Black) - Manual (Page 2)

2
° Quick Operations
Hold down the [ ] (settings) button and press the keys to switch between the various functions.
Select a tone 1
Press one key to select a single tone that plays with each key press.
Press two keys at the same time to select two different tones that play together with each key press. This function is
called “Dual Play”.
Select a song
2 Select the built-in song category.
3 Select either a song on the USB flash drive, or a song recorded in internal memory.
4
Select the song to play back.
Ø “Internal Song List” (p. 18)
Play back or stop a song 5
Play back all of the songs within the category, or just one.
Press the same key again to stop playback.
Specifying the keyboard
tone for song playback
(SMF play mode)
6
Normally you will use the “Auto-Select” setting.
Setting Explanation
Auto-Select (default)
Either “Internal” or “External” is selected automatically depending on the song that you
play back.
Internal
The tone for the song that plays back and the tone you use when playing the keyboard
are the same. The tone for the song changes when you change the tone on the RP107.
We recommend this setting when playing the built-in songs.
The damper resonance (*1) effect is applied to the piano tone for the song.
External
A different tone can be used for the song that plays back and for the tone you use when
playing the keyboard. The tone for the song doesn’t change when you change the tone
on the RP107.
We recommend this setting when playing back song files from your computer connected
via USB.
The damper resonance (*1) effect is not applied to the piano tone for the song.
(*1) This refers to the overall resonance of the acoustic piano when its damper pedal is pressed (the sound of other
strings vibrating in sympathy when you press the damper pedal, and the resonance of the entire instrument).
Bluetooth settings 7
Turn Bluetooth on to connect to the “Roland Piano App” app. (Default value: On)
Ø “Connecting the Piano and a Mobile Device via Bluetooth” (p. 10)
Start and stop the
metronome
8 The metronome switches on/off with each key press.
Change the metronome’s
volume
9 1–10 (default value: 5)
Change the time signature 10
0/4 (*2), 2/2, 3/2, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8, 8/8, 9/8, 12/8 (default value: 4/4)
(*2) Each beat plays with the same sound when the metronome plays.
Change the tempo 11 10–500 (default: 108)
Add ambience to the
sound (Ambience)
12
The reverberation that is characteristic of a performance in a concert hall can be added to the sound. Higher values
produce deeper ambience; lower values produce shallower ambience.
0–10 (default value: 1)
Make the ambience
sound natural when using
headphones (Headphones 3D
Ambience)
13
You can apply a Headphones 3D Ambience effect that creates the impression that the sound is being heard from the
piano itself even when you’re using headphones. (Default value: On)
* The Headphones 3D Ambience effect applies only to piano sounds; it does not apply to other sounds.
Adjust the brightness of
the sound (Brilliance)
14
You can adjust the brightness of the sound when you play the keyboard or when you play back a song. Higher values
produce brighter sounds.
-10–+10 (default value: 0)
5 (default v
alue)
-1 O
n/off
D1 D2 D3 E1 E2 E3 F1 F2 F3 G1 G2 G3 A1 A2 A3 B1 B2 B3 C2 C3 C4 D4
+1 Conc
er
t P
iano
Brigh
t P
iano
M
ag
ical P
iano
Vibr
aphone
SymphonicS
tr1
Ballad P
iano
Stage EP Harpsichor
d
Pipe O
rgan
Sof
t P
ad
M
ello
w P
iano
Pop EP Celesta Combo Jz. O
rgan
Jazz S
ca
t
List
ening
Do R
e M
i L
esson
Ensemble Scales Hanon Be
ye
r
A
ut
o-S
elec
t
Ex
ternal
In
ternal
Bur
gmüller
Cz
ern
y 100
En
ter
tainmen
t
Pla
y/st
op one song
Pla
y/st
op all songs
G
o t
o pr
evious song
G
o t
o ne
xt song
USB M
emor
y
O
n (default v
alue)
G
o t
o first song
Off In
ternal M
emor
y (one song only)
Press and hold
1
2
1 2 4 3 5 6 8 7 9
A0 B0 C1
F#3 F#2 F#1 C#4 C#3 C#2 C#1 A#0 D#3 D#2 D#1 A#3 A#2 A#1 G#3 G#2 G#1