Roland VC-100UHD 4K Video Scaler/Converter/Streamer - Manual (Page 17)

17
Using the Memory
How the Memory Is Configured
This unit operates with the settings saved in “current memory.”
The current memory consists of “common parameter memory” and
“parameter memory.”
The settings in current memory are automatically saved when editing
with this unit, and are loaded when you turn on the power.
VC-100UHD
Common parameters
Parameters
Current memory
Internal memory
Memory 1 Memory 5
Memory 2 Memory 6
Memory 3 Memory 7
Memory 4 Memory 8
Recall Store
USB flash drive
Load
Save
vc100uhd .bin
Memory 1 Memory 5
Memory 2 Memory 6
Memory 3 Memory 7
Memory 4 Memory 8
Common parameters
Parameters
Current memory
Common parameter memory
Saves the LCD, network and panel lock settings.
Parameter memory
Saves the input/output and channel settings.
Up to eight parameter memories can be saved to internal memory.
Also, you can save all settings as a single set to a USB flash drive.
Saving to Internal Memory
This saves the parameter memory settings to internal memory.
1 . Select Root menu “System” 0 “Memory” 0
Internal Memory “Store.”
2 . Turn the [VALUE] knob to select the save-destination
memory (NO. 1–8).
3 . Turn the [PAGE/CURSOR] knob to select “Execute,” and
then press the [PAGE/CURSOR] knob.
The current settings are saved.
When the operation is finished, the message “Done.” appears.
Recalling the Saved Settings
This recalls the settings saved in internal memory. When these
settings are recalled, the contents of the parameter memories that are
in current memory are overwritten.
1 . Select Root menu “System” 0 “Memory” 0
Internal Memory “Recall.”
2 . Turn the [VALUE] knob to select the memory (NO. 1–8)
that you want to recall.
3 . Turn the [PAGE/CURSOR] knob to select “Execute,” and
then press the [PAGE/CURSOR] knob.
The settings are recalled.
When the operation is finished, the message “Done.” appears.