Roland VC-100UHD 4K Video Scaler/Converter/Streamer - Manual (Page 28)

28
Setup Menu List
CH. 1–8 0 USB Streaming 0 Effects
Menu item
(Parameter)
Value
(Bold: default)
Explanation
Dynamic Range
Correction
-64– 0 –+63 Calibrates the dynamic range.
Gamma Correction -0.30– 1.00 –3.30 Adjusts the gamma value.
Color Correction Calibrates the color.
Brightness -128– 0 –+127 Adjusts the brightness.
Contrast -128– 0 –+127 Adjusts the saturation.
Saturation -128– 0 –+127 Adjusts the contrast.
Red -128– 0 –+127 Adjusts the red level.
Green -128– 0 –+127 Adjusts the green level.
Blue -128– 0 –+127 Adjusts the blue level.
Copy Settings from
Previous, Initial, Sub Proc., USB
Streaming, Channel 1–8
Copies the parameter settings in “Effects” from another channel or other
source.
Previous:
The last value set
Initial: The default value
(Execute) Press the [PAGE/CURSOR] knob to copy the settings.
CH. 1–8 0 USB Streaming 0 Audio
Menu item
(Parameter)
Value
(Bold: default)
Explanation
Audio Channel 1/2
Assign
Sets the input source for audio assigned to audio channels 1/2.
SDI CH. 1/2–15/16
Each channel of the 12G-SDI IN connector
HDMI CH. 1/2–7/8 Each channel of the HDMI 4K IN connector
HDMI 2 CH MIX
Two channels are assigned, down mixed with the audio from the HDMI 4K IN
connector.
USB CH. 1/2 STREAMING port audio
Analog CH. 1/2 LINE IN jacks audio
Analog CH. 3/4 AUDIO IN/OUT connector audio
Test Tone Test tone
None Not assigned
Delay 0.0–16.0fs (frames)
Adjusts the audio delay time. Delays the output of the audio by the specified
time.
Level 0– 100 –127 Adjusts the volume.
Copy Settings from
Previous, Initial, Main Proc.,
Sub Proc., USB Streaming,
Channel 1–8
Copies the parameter settings in “Audio” from another channel or other source.
Previous:
The last value set
Initial: The default value
(Execute) Press the [PAGE/CURSOR] knob to copy the settings.
CH. 1–8 0 Copy Settings from
Menu item (Parameter) Value (Bold: default) Explanation
Copy Settings from
Initial, Channel 1–8
Copies the parameter settings in “Channel” from another channel or other
source.
Initial:
The default value
(Execute) Press the [PAGE/CURSOR] knob to copy the settings.