Roland JUPITER-X Synthesizer - Manual (Page 19)

19
Splitting the keyboard to play different
sounds
(Split)
1.
Press the [SPLIT] button to make it light.
Split turns on.
The part 1 tone sounds in the right-hand region of the keyboard,
and the part 2 tone sounds in the left-hand region.
To return to the original state, press the
[SPLIT] button once again.
* To change the split point, hold down the [SPLIT] button and press the key
that you want to specify; alternatively, use SCENE ZONE EDIT to set the
KEY RANGE. For details, refer to “Reference Manual” (PDF).
Layering two sounds
(Dual)
1.
Press the [DUAL] button to make it light.
Dual is turned on.
This layers the part 1 tone with the part 2 tone, so that they are
heard together.
To return to the original state, press the
[DUAL] button once again.
* If you hold down the [SHIFT] button and press the [DUAL] button to turn
Dual on, settings are automatically made so that part 1 is output from L
and part 2 is output from R.
Transposing the keyboard in octave units
(Octave)
1.
Press the OCTAVE [-] [+] button .
To return to the original state, press the OCTAVE [-] and [+] buttons .
Transposing the keyboard in semitone
steps
(Transpose)
1.
Hold down the [TRANSPOSE] button and press the OCTAVE
[-] [+] button .
To return to the original state, hold down the [TRANSPOSE] button
and press the OCTAVE [-] button and [+] button .
Playing single notes
(Monophonic)
1.
Press the [MONO] button to make it light.
To return to the original state, press the [MONO] button once again.
Layering the same tone to thicken the
sound
(Unison)
1.
Press the [UNISON] button to make it light.
To return to the original state, press the [UNISON] button once
again.
Preventing dynamics changes in your
performance
(Velocity Off)
1.
Press the [VELOCITY OFF] button to make it light.
Your keyboard dynamics will not affect the sound.
To return to the original state, press the
[VELOCITY OFF] button
once again in function mode.
Smoothly changing the pitch
(Portamento)
1.
Press the [PORTAMENTO] button to make it light.
To return to the original state, press the [PORTAMENTO] button
once again.
* You can access the portamento time edit screen by holding down the
[SHIFT] button and pressing the [PORTAMENTO] button .
Using Performance Functions