Roland JUPITER-X Synthesizer - Manual (Page 8)

8
Panel Descriptions
1 Common section
Display 1
Shows various information for the operation.
[1] [2] knobs
Use these knobs to move the cursor or change a value.
PAGE [<] [>] [ ] [ ] buttons
Move the cursor position up/down/left/right.
These buttons also switch between screens.
[EXIT] button
Returns you to the previous screen.
In some screens, this cancels the operation currently being
executed.
* By holding down the [EXIT] button and operating a knob or other
controller, you can check its current value. This lets you check a value
without modifying the sound.
[ENTER] button
Press this to confirm a value or execute an operation.
[MENU] button
Switches to the MENU screen.
[SHIFT] button
If you hold down this button and operate a knob, slider, or button,
the display 1 shows the corresponding edit screen.
* By holding down the [SHIFT] button and operating a knob or other
controller, you can jump to the edit screen for that parameter.
[WRITE] button
Saves sounds and system settings.
2 I-ARPEGGIO
[TYPE] knob
Selects the arpeggio type.
[RHYTHM] knob
Selects the type of rhythm.
[TEMPO] knob
Sets the tempo of the arpeggio.
[DURATION] knob
Sets the duration of the notes (the percentage of the note value
during which the sound is heard).
[SHUFFLE] knob
Adjusts the amount of shuffle (bounce).
[KEYS] button
When this is on, the arpeggio pitches change according to the keys
that you press.
[BEAT] button
When this is on, the arpeggio pattern changes according to the
timing at which you play the keys.
[HOLD] button
Turns the hold function on/off.
When hold is on, the pitch of the last-played key is held.
[ON/OFF] button
Turns the arpeggio function on/off.
Top Panel
A
1 2 3 4 9 5
10
6 8 7
11
13
12
* Some controllers are not operable in some modes. For details, refer to “Reference Manual” (PDF).