Roland JUPITER-X Synthesizer - Manual (Page 2)

2
WARNING
To completely turn off power to the
unit, pull out the plug from the outlet
Even with the power switch turned off,
this unit is not completely separated
from its main source of power. When
the power needs to be completely
turned off, turn off the power switch on
the unit, then pull out the plug from the outlet. For
this reason, the outlet into which you choose to
connect the power cord’s plug should be one that
is within easy reach and readily accessible.
Concerning the Auto Off function
The power to this unit will be turned
off automatically after a predetermined
amount of time has passed since it
was last used for playing music, or its
buttons or controls were operated (Auto
Off function). If you do not want the power to be
turned off automatically, disengage the Auto Off
function (p. 12).
Do not disassemble or modify by
yourself
Do not carry out anything unless you
are instructed to do so in the owner’s
manual. Otherwise, you risk causing
malfunction.
Do not repair or replace parts by
yourself
Be sure to contact your dealer, a Roland
service center, or an official Roland
dealer.
For a list of Roland service centers and
official Roland dealers, refer to the
Roland website.
Do not use or store in the following
types of locations
• Subject to temperature extremes
(e.g., direct sunlight in an enclosed
vehicle, near a heating duct, on top of
heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on
wet floors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and
shakiness; or are
• Placed in a poorly ventilated location.
Use only the stand that is
recommended
This unit should be used only with a
stand that is recommended by Roland.
WARNING
Do not place in a location that is
unstable
When using the unit with a stand
recommended by Roland, the stand
must be carefully placed so it is level
and sure to remain stable. If not using
a stand, you still need to make sure
that any location you choose for placing the unit
provides a level surface that will properly support
the unit, and keep it from wobbling.
Precautions regarding placement of
this unit on a stand
Be sure to follow the instructions in the
Owner’s Manual carefully when placing
this unit on a stand (p. 5).
If it is not set up properly, you risk
creating an unstable situation which
could lead to the unit falling or the stand toppling,
and may result in injury.
Connect the power cord to an outlet of
the correct voltage
The unit should be connected to a
power supply only of the type described
as marked on the rear side of unit.
Use only the supplied power cord
Use only the attached power cord. Also,
the supplied power cord must not be
used with any other device.
Do not bend the power cord or place
heavy objects on it
Otherwise, fire or electric shock may
result.
Avoid extended use at high volume
Use of the unit at high volume for
extended periods of time may cause
hearing loss. If you ever experience any
hearing loss or ringing in the ears, you
should immediately stop using the unit
and consult a specialized physician.
Do not allow foreign objects or liquids
to enter unit; never place containers
with liquid on unit
Do not place containers containing
liquid (e.g., flower vases) on this
product. Never allow foreign objects
(e.g., flammable objects, coins, wires)
or liquids (e.g., water or juice) to enter
this product. Doing so may cause short
circuits, faulty operation, or other
malfunctions.
USING THE UNIT SAFELY
WARNING
Turn off the unit if an abnormality or
malfunction occurs
In the following cases, immediately turn
off the power, remove the power cord
from the outlet, and contact your dealer,
a Roland service center, or an official
Roland dealer for service.
• The power cord has been damaged; or
• If smoke or unusual odor occurs; or
• Objects have fallen into, or liquid has been
spilled onto the unit; or
• The unit has been exposed to rain (or otherwise
has become wet); or
• The unit does not appear to operate normally
or exhibits a marked change in performance.
For a list of Roland service centers and official
Roland dealers, refer to the Roland website.
Be cautious to protect children from
injury
Always make sure that an adult is
on hand to provide supervision and
guidance when using the unit in places
where children are present, or when a
child will be using the unit.
Do not drop or subject to strong impact
Otherwise, you risk causing damage or
malfunction.
Do not share an outlet with an
unreasonable number of other devices
Otherwise, you risk overheating or fire.
Do not use overseas
Before using the unit in overseas,
consult with your retailer, the nearest
Roland service center, or an authorized
Roland distributor.
For a list of Roland service centers and official
Roland dealers, refer to the Roland website.
Don’t place burning objects on the unit
Don’t place any burning object (such as
a candle) on the unit.
Be aware of weather conditions
Use the apparatus in moderate climates.
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices About the Symbols
ALWAYS OBSERVE THE FOLLOWING