Yamaha TW-E3C True Wireless Earbuds (Red) - Manual (Page 23)

Connecting to a Device Already Paired
Here’s how to connect to a Bluetooth device to which this product has already been paired.
1
Activate Bluetooth on the Bluetooth device.
2
Remove the earbuds from the charging case.
The earbuds will turn on and both earbuds automatically connect to the last Bluetooth device
to which they were connected. Once connected, the indicators light up as shown below.
Earbud that is now primary
Lights up for 1 sec
Lights up for 10 sec
Lights up for 1 sec
If successfully connected, you will hear the “Connected” audio message in the earbud. Pairing is now
complete.
If the earbuds do not automatically connect to a Bluetooth device, they are waiting for a connection or are
in pairing standby mode. Make the connection to the earbuds from your Bluetooth device.
NOTE
(
One of the earbuds (L or R) will be the primary earbud when connecting, according to their remaining battery power.
( If the earbuds (L) and (R) do not automatically connect, put them back into the charging case and take them out again.
Related links
( “Pairing for the First Time” (p.19)
( “Pairing with a Different Device” (p.21)
( “Connecting to two Bluetooth devices at the same time (multi-point connection)” (p.24)
(
“Using only one of the earbuds” (p.49)
23
Bluetooth® Connectivity > Connecting to a Device Already Paired