Yamaha TW-E3C True Wireless Earbuds (Red) - Manual (Page 27)

5
Select “Yamaha TW-E3C” from the list of connected Bluetooth devices, shown on
the first Bluetooth device.
Yamaha TW-E3C
The audio message “Connected” plays once in the earbuds, and both Bluetooth devices are
connected simultaneously. Once connected, the indicators light up as shown below.
Pairing is now complete.
Earbud that is now primary
Lights up for 10 sec
NOTE
( Pairing standby mode will automatically end on this product after about two minutes. To pair again or if the connection was
unsuccessful, go back to step 1.
( One of the earbuds (L or R) will be the primary earbud when connecting, according to their remaining battery power.
(
If the earbuds (L) and (R) do not automatically connect, put them back into the charging case and take them out again.
( You can connect to up to two Bluetooth devices that support multi-point connection at the same time. When connecting a third
Bluetooth device, disconnect one of the two Bluetooth devices that are already connected.
(
Either device that’s connected can be used to play music, but music cannot be played from both devices at the same time.
(
You cannot switch between devices by operating one while the other is playing back music. Stop the music that’s playing back first,
and then operate the other device.
( If you put the earbuds back into the charging case after establishing a multi-point connection and then take the earbuds out of the
case again, the earbuds automatically connect to both devices to which they were connected. When connecting to a different
Bluetooth device, disconnect one of the previously connected Bluetooth devices.
( The operations for multi-point connection vary depending on your Bluetooth device. We do not guarantee that these operations
will work on all Bluetooth devices. See the user’s manual of your Bluetooth device for details.
( The connection to the second device may be interrupted when you use the first device, depending on the connected device.
( The earbuds may not operate correctly with some apps and software. If they do not work correctly, operate using the connected
device.
27
Bluetooth® Connectivity > Connecting to two Bluetooth devices at the same time (multi-point connection)