Canon Speedlite 430EX III-RT - Manual (Page 30)

30
m Bounce
If you attach the provided bounce adapter to the Speedlite and bounce
the flash light on the ceiling or wall, etc., you can spread the flash light
across a larger area and suppress the shadows of the subject.
Also, if the flash head is turned 90° upward to bounce the flash light on
the ceiling, etc., the diffused flash light emitted out of the side facing the
subject will be casted on the front of the subject (shooting distance
guidance: within approx. 1.5 m/4.9 ft., at ISO 100), further suppressing
the shadow of the subject. When shooting portraits, catchlight effect can
also be obtained.
1
Attach the bounce adapter.
Attach the adapter securely to the
flash head until it clicks in place, as
shown.
Check that the display changes to
<
H >.
When removing the adapter, lift the
left and right removal tabs and
remove the adapter from the flash
head.
2
Take the picture.
Take the picture with the flash light
bouncing off the ceiling, walls or the
like.
q Bounce Adapter
“Canon” logo
Removal tab