Canon Speedlite 430EX III-RT - Manual (Page 74)

74
Wireless Settings
Turn < 9 > to select any channel
between Ch. “ Y ” and “ [ ”,
then press < 8 >.
You can save the wireless settings to the slave unit, and recall the
settings later. Operate each slave unit individually as you desire to save
or recall its settings.
1
Select < L >.
Press the < 1 > button.
Turn < 9 > to select < L >, then
press < 8 >.
2
Save or load the settings.
Turn < 9 > to select < V > (save)
or < J > (load), then press < 8 >.
Select < ; >.
X The settings are saved (stored in the
memory) or the settings that were
saved are set.
Transmission channel
Memory Function
If the transmission channels of the master unit and slave unit are different,
the slave unit will not fire. Set to the same number.