Canon Speedlite 430EX III-RT - Manual (Page 63)

63
When using an EOS DIGITAL camera
released in and after 2012, such as the
EOS-1D X, you can shoot in a different
flash mode set for each firing group with
up to 5 groups (A, B, C, D, and E).
The flash modes that can be set are
" E-
TTL II/E-TTL autoflash, # Manual flash,
and $ Auto external flash metering.
When the flash mode is " or $ , exposure
is controlled to result in standard exposure
for the main subject as a single group.
This function is for advanced users who
are very knowledgeable and
experienced in lighting.
1
Set the flash mode to < [ >.
Press the < E > button of the
< S > cross keys of the master unit.
Turn < 9 > to select < S >, then
press < 8 >.
2
Set the firing group of the slave units.
Operate and set the slave units one by one.
Press < 8 >.
Turn < 9 > to select the firing group
symbol, then press < 8 >.
Turn < 9 > to select < a >, < b >,
< c >, < d >, or < e >, then press
< 8 >.
Set the firing group (A, B, C, D, or E)
for all the slave units.
[ : Shooting in a Different Flash Mode for Each Group
A
C
E
D
B
Ceiling
Wireless flash shooting using the < [ > flash mode cannot be performed
with cameras released up to 2011 or EOS REBEL T5/1200D. Shooting with
up to 3 groups (A, B and C) will be applied (p.60).