BenQ BH2801 28" Bar-Type Stretched Commercial Display - Manual (Page 11)

Setting up the display 11
Setting up the display
Mounting the display
You can install the display on a vertical surface with a suitable wall mounting bracket or
on a horizontal surface with the optional desktop stands. Please pay attention to the
following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this
display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the
display to fall or malfunction.
Installing the display on a wall
1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.
4. Identify the wall mounting screw
holes on the back of the display
as shown in the illustration.
5. All models support both landscape and portrait installation.
BH2801/BH3801: 400mm (A) x 100mm (B)
BH2801N/BH3801N: 400mm (A) x 100mm (B)
BH2401/ BH3501: 430mm (A) x 60mm (B)
BH3801D
Please make sure the I/O side is facing down during landscape installation. Incorrect
installation may cause heat dissipation issue.
$
%
:$//028176&5(:7+5($'
'(37+0/
*Screw type: M4*10L
*Screw type: M6*12L