Connecting power – BenQ BH2801 28" Bar-Type Stretched Commercial Display User Manual
Page 19
Connection
19
Connecting power
1. Plug the adapter into the
DC IN
jack on the display.
2. Plug one end of the power cord into the adapter and the other end into an
appropriate power outlet (if the outlet is switched, turn on the switch).
3. The power indicator on the bottom panel of the display will light up red then green,
and the display will automatically power on.
4. BH3801D has two power cords. Please connect both of them for the double side
application.
• The supplied power cord is suitable for use with 100-240V AC power only.
• The power cord and outlet illustrated may differ from the ones used in your region.
• Only use an appropriate power cord for your region. Never use a power cord which appears
damaged or frayed, or change the plug type on the power cord.
• Be aware of the power loading when you use extension cords or multiple outlet power boards.
• There are no user serviceable parts in this display. Never unscrew or remove any covers.
There are dangerous voltages inside the display. Turn off the power and unplug the power cord
if you intend to move the display.
• Warning: For BH3801D, disconnect both supply cords before servicing.
RJ45
RS232
DC IN