BenQ BH2801 28" Bar-Type Stretched Commercial Display - Manual (Page 31)

Basic operations 31
3. Press  /  /  /  on the remote control to select the network’s name and connect
to the network. The password is needed if it is your first time to use the network.
Key in the password and press Connect . The device is now connected to the
WLAN.
Proxy setting
1. Go to Network > Proxy .
2. Check the box of Proxy Switch to enable or disable the function.
3. Enter the proxy host name.
4. Enter the using channel.
• Please make sure your Wi-Fi dongle is approved by BenQ.
• Ethernet will be disable automatically if Wi-Fi turn on and connect to network.
• For wireless connection, BenQ shipment does not include wireless dongles, therefore, you may
purchase it separately via the local dealer.