BenQ BH2801 28" Bar-Type Stretched Commercial Display - Manual (Page 12)

Setting up the display 12
6. Install the wall mounting bracket
on the display and attach the
display to the wall according to
the mounting bracket’s
instructions. The length of the
screw should exceed the
thickness of the wall mounting
bracket by at least 12 mm. Make
sure that all screws are
tightened and secured properly.
(Recommended torque: 9 -
10Kg•cm). The mounting means
should be strong enough to bear
the weight of the display.
• To maintain proper ventilation, keep at least 10 mm of
clear space from the back cover of the display to the
wall.
• Please consult a professional technician for wall mount
installations. The manufacturer accepts no liability for
installations not performed by a professional technician.
• The AC IN/OUT socket should be on the bottom of
the unit when rotating your display.
Thickness of
the wall
mounting
bracket
12 mm
(0.47")
LCD display
10mm
(0.39")