BenQ IL5501 55" SmInteractive Signage Display - Manual (Page 31)

Basic operations 31
Updating software
Whenever a new version of software is available, the system will automatically detect the
update and will prompt you to download it every time you turn on the display. If you
want to update the software, choose NETWORK UPDATE or USB UPDATE to
continue the update. Or your can skip this step and update the software later.
To manually update the software:
1. Go to
System > About .
2. Select one of the following options to update the software:
- If you want the system to search for the latest software and automatically start the
update process, select Update system .
- If you want to install the update software stored on a USB drive, select USB
update .
• Software update process may take some time to complete.
• During the update process, do not turn off the device or disconnect the Internet connection.
Any interruptions during the software update process may permanently damage your display.