Ashly FX60.2 Multipurpose Installation Network Amplifier with DSP (1 RU, 1/2 Rack) - Manual (Page 12)

12
FX Amplifier • Operating Manual
5.5 Settings Tab
The Settings Tab enables miscellaneous
amplifier settings to be configured, installation
site information to be recorded, and provides
access to the following sub-menu items:
• System Information
menu provides
editable text fields
for the recording of
installation data.
• Device menu
displays specific
amplifier information
including model
number, serial
number, firmware
version, MAC
address, and WiFi
MAC address. A
firmware update
routine and device
identifier button are
also found in the
Device menu.
Note: The "Find Me" locator button in the
Device menu will continually flash the
amplifier's front panel LEDs in a unique
pattern until the button is pressed again .
• Backup & Restore menu enables the
complete amplifier configuration to be
backed up to an external file, and enables
previously saved backup files to be restored
to the currently connected amplifier. Also
found in this menu is a Recovery button
that will restart and reconnect the amplifier.
The Reset button will restore the unit to it's
factory default settings and permanently
erase all data.
• Speaker Library allows the user to create,
edit, and import custom made or other
provided speaker libraries.
1) Click on the Create button to create a new
speaker library. Name the library and revision
if desired. A library may contain several
speaker series.
2) Select a Speaker Series, then use the
icon to import one or more *.zcp speaker
preset files into that series. Note: *.zcp
speaker preset files can be created and
exported in the Output>Speaker Preset
menu.
3) To add another speaker series, click
.
4) To rename a selected speaker series, click
5) To delete a selected preset or series, click .
6) Click the Update button when complete,
the library is now loaded to the amplifier and
can be used in the Output>Speaker Preset
menu for selecting a library preset to an
amplifier speaker output.
7) To export a complete speaker library
*.zcl
file, click Export from the Speaker Library
Create or Edit menus. The *.zcl file is exported
to the same download folder that is used by
the browser.
8) To import an existing speaker library
*.zcl
file, click the Speaker Library Import button.
Configuration
• Power Management menu enables various
automatic standby and switch-on options
to be engaged. A complete description of
each Auto-On mode can be found in the
Settings>Power Management menu.
In addition, the Power Management menu
offers timed Standby and Mute functions.
Important Note: When Audio (Eco) or Trigger
(Eco) Auto-On power management modes
are selected, network communications will
not function when the amplifier is in standby.
• GPIO menu enables configuration of the
multi-purpose GPIO interface pins on the
amplifier rear panel. See section 7 for
complete GPIO configuration details.
• LAN menu enables configuration and
reset of the wired network options and
parameters. See sec 4.2 for details.
• WiFi menu enables configuration of the
wireless network options and parameters.
See sec 4.2 for details.