Ashly FX60.2 Multipurpose Installation Network Amplifier with DSP (1 RU, 1/2 Rack) - Manual (Page 2)

2
FX Amplifier • Operating Manual
2
FX Amplifier • Operating Manual
Please read the following
important technical, safety
and environmental notices
before installing and using your
amplifier.
Technical Notices
All reasonable design and
engineering steps have been taken
to ensure that these amplifiers
always perform satisfactorily in
their intended application and
environment and will provide
appropriate levels of support
to ensure that all reasonable
customer needs and expectations
are met. Such support however
is contingent on the following
provisions.
These amplifiers are Class-I
products and should be installed
with a mains cable including the
required earth connection to
comply with the Safety Class-I.
These amplifiers should always
be installed by competent and
qualified personnel. Amplifier
damage or failure caused by
installation or operational errors
may invalidate support, warranty or
guarantees of performance.
These amplifiers are not suitable
for use in locations where they may
be accessible to minors.
These amplifiers are intended
to be used specifically for the
amplification of audio signals
and for connection to moving-
coil loudspeaker systems. Use of
these amplifiers for amplification
of signals outside the audio
band (20Hz to 20kHz) or to drive
transducers other than moving-
coil loudspeakers may invalidate
support, warranty or guarantees of
performance.
These amplifiers should only
be used within professionally
installed and configured audio
systems comprising input and
output ancillary equipments that
is known to be of an appropriate
level of performance and in good
operating condition. Any damage
to, or unsatisfactory performance
from, these amplifiers caused
by inadequate or failed input or
output ancillaries may invalidate
support, warranty or guarantees of
performance.
These amplifiers are intended to be
installed and operated indoor in a
controlled environment (pollution
degree, PD2) within an ambient
temperature range of 0°C to 40°C.
These amplifiers are not intended
for use above 2000 meters above
sea level. Amplifiers installation
or operated in environments
outside these limits may invalidate
support, warranty or guarantees of
performance.
Specific warranty terms are the
responsibility of the amplifier re-
seller.
Safety and Environmental
Notices
Note: The intent of the lightning
flash with arrowhead symbol
in a triangle is to alert the user
to the presence of uninsulated
“dangerous” voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to humans.
Note: The intent of the exclamation
point within an equilateral triangle
is to alert the user to the presence
of important safety, and operating
and maintenance instructions in
this manual.
Technical and Safety Notices
WARNING! TO PREVENT FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
Ambient Temperature Note:
If this equipment is operated
in a confined or multiple rack
installation, the internal ambient
operating temperature may exceed
the external ambient temperature.
It is important to ensure in these
circumstances that the published
maximum operating temperature
for the equipment is not exceeded.
Reduced Air Flow: Ensure that rack
or other closed installation does not
restrict the cooling airflow required
for safe and reliable operation of
the equipment.