Ashly FX60.2 Multipurpose Installation Network Amplifier with DSP (1 RU, 1/2 Rack) - Manual (Page 3)

3
FX Amplifier • Operating Manual
3
FX Amplifier • Operating Manual
Important Safety Instructions and Environmental Statement
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near
water.
Do not submerge the equipment in
water or liquids.
Do not use any aerosol spray,
cleaner, disinfectant or fumigant
on, near or into the equipment.
Clean only with a dry cloth.
Do not block any ventilation
opening. Install in accordance with
the manufacturer’s instructions.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus
(including amplifiers) that produce
heat.
To reduce the risk of electrical
shock, the power cord shall be
connected to a mains socket
outlet with a protective earthing
connection.
Do not defeat the safety purpose
of the polarized or grounding type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete
outlet.
Protect the power cord from being
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where they exit from
the apparatus.
Do not unplug the unit by pulling on
the cord, use the plug.
Only use attachments/accessories
specified by the manufacturer.
Unplug this apparatus during
lightning storms or when unused
for long periods of time.
Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
The appliance coupler, or the
AC Mains plug, is the AC mains
disconnect device and shall remain
readily accessible after installation.
Adhere to all applicable, local
codes.
Consult a licensed, professional
engineer when any doubt or
questions arise regarding a
physical equipment installation.
Environmental Statement
This product complies with
international directives, including
but not limited to the Restriction
of Hazardous Substances (RoHS)
in electrical and electronic
equipment, the Registration,
Evaluation, Authorization and
restriction of Chemicals (REACH)
and the disposal of Waste Electrical
and Electronic Equipment (WEEE).
Consult your local waste disposal
authority for guidance on how
properly to recycle or dispose of
this product.