RME Fireface UCX II 40-Channel USB-B Audio/MIDI Interface - Manual (Page 101)

User's Guide Fireface UCX II © RME
101
Record View. Switches from Mixer View to Record View. In Record View Mute and
Solo buttons in first and third row are replaced by Play and Record (Arm) buttons.
A click on the Playback button opens a dialog to assign channels. A flashing play-
back button indicates playback channels have been selected that are not found in
the played back file. A playback is not only possible at the outputs but also at the
mixer input. This way, signals can also be processed with Echo/Reverb and mixed
with any other signal to any output
Note: The level meters only show the DURec playback signal when in
Post FX
mode.
The Record buttons behave in a similar way to other buttons in TotalMix: Activa-
tion/deactivation of all channels to the right by Ctrl + mouse click, flashing buttons
when the maximum number of channels has been exceeded after changing the
sample rate. When loading a different workspace during ongoing recording and
playback, the configuration of record and playback is not updated or changed.
The display of the Fireface UCX II brings up the
Record/Playback menu automatically when a
storage medium is connected and recognized, or after pushing the REC/PLAY button.
File. Name of the currently selected file.
Status. This line changes its content depending on the current
operation: information on the selected file, the ongoing or just
completed recording: xx channels selected (number of channels
armed for recording), SR xx kHz (sample rate), USB xx%, x Err
(USB Load and number of errors).
Time. Length of the recording or current playback position. When
selecting the record button at the unit the medium ’s remaining
total record time is shown. Due to the limitation to 100 files the
actual recording time may be shorter. In Stop and Playback
mode turning the encoder allows to change the current playback position.
Transport Bar. Turning the encoder moves the cursor over Del (Delete), Record , Play/Pause
and Stop . The selected function is initiated by pressing the encoder. During playback the buttons
Del / Record will change to Previous File / Next File.
Turning the encoder brings up the
Rec/Play Settings with subpages USB Media , Record , Play-
back and Time & Date .
USB Media.
DURec/Partition. Default is 1, which means the first partition
found on the USB media will be used. On some media it will be
necessary to use partition 2 or up.
Capacity. Storage size of the media.
Free. Free space on the media.