Setups – RME Fireface UCX II 40-Channel USB-B Audio/MIDI Interface User Manual
Page 98
98
User's Guide Fireface UCX II
© RME
37. Setups
TotalMix FX can transfer all current settings to the device (Options/Store Current State into De-
vice). There are six memory slots (Setups) available. An example:
Inputs with no processing, gain set to +30 dB and phantom power active. Outputs without
processing, faders for 1/2 set to 0 dB, 9/10 at
– 20 dB, clock mode master, saved in Setup 1.
Inputs with Compressor, Factory Preset Mix Limiter (digital overload protection), gain set to
+30 dB, no phantom power, outputs 1/2 with EQ (factory preset Modern Bass Treble),
outputs 9/10 with EQ (factory preset Cheap Phones Compensation), faders for 1/2 at 0 dB,
9/10 at -20dB, clock mode AutoSync, saved in Setup 2.
Via the menu SETUP/REV, Setups, one can switch between setups 1 and 2 at any time, alter-
nating between entirely different configurations. Further examples would be activating re-
verb/echo, or temporary monitoring of the input signal. Very comfortable is the use of the Ad-
vanced Remote USB, as its buttons can load the Setups 1 to 6 directly
On the iPad the optional app
TotalMix FX for iPad
gives full control of all functions and parame-
ters in real-time and with full overview, similar to working under Windows and Mac.