RME Fireface UCX II 40-Channel USB-B Audio/MIDI Interface - Manual (Page 71)

User's Guide Fireface UCX II © RME
71
Echo. Activated by the On button.
Type. Lists different echo algorithms for selection. Available are:
 Stereo Echo. Separated echo generators on left and right channel. As a result the echo
follows the sound source within the stereo field.
 Stereo Cross. Echo generator on left and right channel with cross coupled feedback which
is only working for the stereo parts of the input signal. In case the input signal is only left or
right the Stereo Cross acts exactly like the Pong Echo.
 Pong Echo. Generates an echo that jumps between left and right channel, independent
from the source signal’s stereo position.
Settings
Delay Time. Sets the delay time for the first echo.
BPM. A double click on the lower value field offers a delay adjustment as Beats Per Minute.
Feedback. Feedback to produce further echoes.
Width. Adjusts the stereo width of the echo signal from 100 (stereo) to 0 (mono).
Volume. Adjusts the level of the echo effects signal sent to the FX return bus.
High Cut (HC). Option for more natural sound or intentional damping of the delayed signal.
Preset. Settings of the Reverb and the Echo can be stored, loaded, and copied between chan-
nels at any time. A click on Preset opens a menu with several entries:
 Recall: Presets stored before by the user
can be selected and loaded
 Save to: There are 16 storage places avail-
able (Reverb/Echo Preset 1 to 16)
 Import: Loads a previously stored TM FX
Reverb file (.tmrv) or a TM FX Echo file
(.tmeo)
 Export: Stores the current state as TM FX
Reverb file (.tmrv) or as TM FX Echo file
(.tmeo)
 Factory: Includes 10 examples for the con-
figuration of the Reverb
 Reset: Resets the Reverb or Echo
 Rename: The Presets 1 to 16 can be renamed. The changes will be shown in both lists
Recall and Save to.