Elmo HV-8000SX - Manual (Page 22)

- 21 -
The upper lighting unit for presenting
material such as printed matter and 3-D
objects, and the baselight for presenting
transparent material, such as slide, and
negative films, are built in to the
Presenter.
When the lamp button [LAMP]
( [UPPER] / [BASE] ) on the front
panel or the lamp button [LAMP] on the
wireless remote control is pressed, the
fluorescent lamp lights up in 1 to 3
seconds.
Every time the lamp button [LAMP] on
the wireless remote control is pressed,
lighting is switched in a cycle of the
lighting unit lights up
the base
light lights up the base light
goes out.
The lighting unit lights up when the
power supply is turned ON.To turn OFF
the lamp, press the button for the
respective lamp.
Lighting
7. VARIOUS FUNCTIONS
IRIS OPEN LAMP
Front panel
Wireless remote control
Note: It is impossible to have the upper lighting unit and the baselight lit up together.
Note: To obtain a sharp image with good color rendering, it is sometimes necessary to
use the upper lighting unit.