Elmo HV-8000SX - Manual (Page 41)

- 40 -
Display of static images
By clicking the links [SXGA], [VGA] and [QVGA] at the HV-800SX/8000SX/
8500SX page, the quasi-moving image page and the REFRESH page, the static
images of 1280X1024, 640X512 and 320X256 in size can be displayed, respectively.
To save the static image, use the function of the Web browser.
When any link at the HV-800SX/8000SX/8500SX page is clicked, the static image is
displayed in the same window. However, when any link at other pages is clicked,
another window opens, and the static image is displayed in that window.
Display of quasi-moving images
When the link [LIVE] is clicked at the
HV-800SX/8000SX/8500SX page,
another window opens, and a quasi-
moving live image is displayed.
However, to display quasi-moving
images, Java and JavaScript must have
been set enabled. If the Presenter is
used in the environment where Java or
JavaScript are not set enabled, click the
link [REFRESH]. Then, a page that
renews static images at specified
intervals is be displayed.
Quasi-moving images can be displayed simultaneously at up to 15 clients. If more
clients access the Presenter, the screen displays the message “LIVE mode already has
the limited number of access. Please wait or use REFRESH!”
The frame rate of the quasi-moving image is max. 3.75 frames per second. However,
the frame rate depends on the processing capacity of the host, the network
environment, the number of connections units, etc.
Note: If the power supply to the Presenter is turned OFF while the quasi-moving
image is in display, the host displaying the quasi-moving image may, depending
on the Web browser in use, continue the internal processing even if the Web
browser is closed. Normally, this causes no problem. However, if this is
repeated again and again, the operation of the host may be destabilized. If the
host becomes unstable, restart the host.