Elmo HV-8000SX - Manual (Page 28)

- 27 -
To present the material with a little half
tone such as documents.
Images with sharp characters and lines
contrasty with background can be
obtained.
When the contrast button [CONTRAST]
on the operation panel is pressed, the
indicator lamp lights up, and the image
becomes contrasty.
When the contrast button [CONTRAST]
is pressed again, the indicator lamp goes
out, and the image is reset to the normal
condition. Operation panel
Contrast
White Balance
Operation panel The camera of the Presenter
automatically adjusts the shooting color
balance (AUTO mode). However,
depending on the color arrangement of
document or the like, this color balance
may be lost. In such case, shoot the stage
surface, and press the white balance
button [WHITE BALANCE] on the
operation panel. Then, the mode is
switched to the ONE-PUSH mode, the
indicator lamp blinks and then lights up,
and the white balance is fixed.
When the white balance button [WHITE BALANCE] is pressed again, the indicator
lamp goes out, and the mode returns to the AUTO mode.
AUTO .............To set the white balance in the auto follow mode (initial setting).
ONE-PUSH....To set the push-set white balance. By pressing the button [WHITE
BALANCE], the white balance for the then color temperature is
fixed.
Note: The automatically followed color temperature ranges from approx. 3000k to
8000k.
Note: When the white balance is set to the MANUAL mode on the OSD, the white
balance is fixed, and the indicator lamp remains lighting. When the white
balance button [WHITE BALANCE] on the operation panel is pressed while the
indicator lamp is lighting, the indicator lamp goes out, and the mode is switched
to the AUTO mode.