Elmo HV-8000SX - Manual (Page 24)

- 23 -
Video-out Terminal Output signal
Main camera video signal
Microphone
Microphone
External video signal 1
External audio signal 1
Monaural
Monaural
RGB1
Stereo 1 (L/R)
Microphone
External video signal 2
External audio signal 2
Monaural
RGB2
Stereo 2 (L/R)
Main camera video signal
Main camera video signal
Input
Main
Unit
RGB1
RGB2
Audio-out Terminal
RGB L R
Table of Video- and Audio-in / out Terminal Selections
Note: The input signals to the external input terminal RGB1 and RGB2 can be output
to the NTSC/PAL monitor if their frequencies are among the listed in the table at
the next page.
Operation panel Select the signal to be output to the
NTSC/PAL monitor. When the monitor
output button [RGB1] or [RGB2] on the
operation panel is pressed while [RGB1]
or [RGB2] is selected for the input
selection, the indicator lamp lights up,
and the image from the equipment
connected to the external input terminal
[RGB1] or [RGB2] is presented on the
NTSC/PAL monitor. When the [MAIN]
button of the monitor output on the
control panel is pressed, the indicator
lamp lights up, and the image from the
main camera is presented on the
NTSC/PAL monitor.
Output to the monitor