Emerson Radio iP500 - Manual (Page 29)

28
6.) If necessary, press the iPod PLAY/PAUSE button to begin playback.
7.) Press the Volume + / – buttons on this system to adjust the iPod ® volume
level.
NOTE: When your iPod ® is docked in this system the click-wheel volume
control on the iPod ® is automatically defeated. The volume can only be
adjusted with the controls on this system.
8.) To skip forward or back to other iPod ® tracks press the Tuning + ( ) / – ( )
buttons on the top panel or iPod FWD. / iPod REV. buttons on the remote
control, or use the iPod ® click-wheel navigation controls.
To perform high-speed search within tracks depress and hold the Tuning +
( ) / – ( ) buttons on the top panel or iPod FWD. / iPod REV. buttons on
the remote control, or use the iPod ® click-wheel navigation controls as usual.
Release the controls when you hear the desired passage and normal playback
will resume at that point.
9.) To pause during playback, press the iPod PLAY/PAUSE button again.
Press once more to cancel pause and resume playback.
10.) To shut the iPod ® off, depress and hold the iPod PLAY/PAUSE button
until the iPod ® stops playing and the display goes blank, or the ‘Charging’
screen appears.
NOTE: If you wish to navigate through the iPod ® menu to select among “Artists”,
“Albums”, “Songs”, “Genres” etc., you must use the iPod ® click-wheel navigation
controls as usual. Those options cannot be selected from the controls on the
main unit or the remote.
iP500_042307.p65 23/4/2007, 17:01 28