Emerson Radio iP500 - Manual (Page 30)

29
Removing or Changing The iPod ® Adapter
If you will be using different ‘dockable’ iPod ® models with this system you will
have to install the appropriate adapter in the docking area for each different
iPod ® model. The procedure for removing and changing the iPod ® adapter is
as follows:
1.) Remove your iPod ® from the docking station as usual.
2.) Lift up on the docking cradle and remove it from the docking station as
shown.
3.) Press on the bottom of the iPod ® adapter as shown to remove it from the
docking cradle.
4.) Re-install the docking cradle in the docking station.
5.) Insert the desired iPod ® adapter in the docking cradle.
iPod ® Adapter
Docking Cradle
(Bottom up)
iP500_042307.p65 23/4/2007, 17:01 29