Emerson Radio iP500 - Manual (Page 37)

36
To Activate or Deactivate The Alarm
Press the Alarm On/Off button once on the top panel, or on the remote control, to
activate the alarm.
One of the alarm mode icons will appear in the time
display to confirm that the alarm is ‘On’.
Press the Alarm On/Off button again to deactivate the alarm. The alarm icon
disappears.
Wake-up To Radio
1.) Turn the radio ‘On’, select the station that you wish to hear at the wake-up
time, and turn the radio ‘Off’ again.
2.) Check and adjust the alarm time setting if necessary and make sure the
“ RAD” alarm mode is selected.
3.) Press the Alarm On/Off button to activate the alarm. Make sure the “ RAD”
icon appears in the display.
4.) At the selected wake up time the radio will turn on automatically. It starts softly
and gradually gets louder.
It will continue to play for 60 minutes and then shut
off automatically until the following day.
5.) To stop the radio alarm sooner, press the Alarm On/Off button once. The
radio stops immediately but the “ RAD” indicator remains in the display and
the alarm remains set for the following day.
To deactivate the alarm completely press the Alarm On/Off button once more.
The “ RAD” indicator disappears.
iP500_042307.p65 23/4/2007, 17:01 36