Electrolux EEKG5048 - Manual (Page 26)

26 electrolux care and cleaning
5. Clean the outer and inner glass
using hot soapy water or hob
cleaner may be used. Do not use
hob cleaner on the Stainless Steel or
painted finishes. Do not try to clean
the foil, which is inside the door.
The foil is there to help keep the
door cool, if it is damaged it will not
work. Ensure that all parts are well
rinsed and thoroughly dried before
attempting to replace the outer
door.
If the door glass panel becomes
chipped or has deep scratches the
glass will be weakened and must
be replaced to prevent the
possibility of the panel shattering.
Please contact your local service
force centre who will be pleased to
advise further.
To replace the outer door glass
1. Holding the oven glass with both
hands, gently place the locators into
the holes of the brackets at the
bottom of the oven door.
2. Push the top of the oven glass
towards the oven door; ensuring the
screw location holes line up.
3. Hold the glass in place with one
hand and insert the crosshead
screws into the location holes with
the other hand. Give the screws
one turn to ensure the glass is
secure.
4. Tighten the screws positively with a
Pozidrive screwdriver before closing
the oven door.
Do not attempt to use the oven
without the glass being in place.
To clean the glass door panels
Clean the glass door panels using hot
soapy water, hob cleaner may also be
used. Do not use hob cleaner on the
stainless steel or painted surfaces.
Ensure that all parts are well rinsed
and thoroughly dried before attempting
to replace the glass.