Elation Professional Power Wash 250B - Manual (Page 16)

Power Wash 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 16
3 The Menu Field -
The control panel located on the side of the fixture allows you to
access the main menu and make all necessary adjustments to the
POWER WASH 250™. During normal operation, tapping the
“MODE” key once will access the fixture’s main menu. Once in the
main menu you can navigate through the different functions and
access the sub-menus with the Up and Down buttons. Once you
reach a field that requires adjusting, tap the ENTER button to
activate that field and use the UP and Down button to adjust the
field. Tapping the Enter button once more will confirm your setting.
Once a setting is saved the LED will briefly readout OK to confirm a
new setting has been made and locked into memory. You may exit
the main menu at any time without making any adjustments by
tapping the MODE button.
Level
1
Level
2
Level
3
DISCRIPTION
D001 Indicate the Staring DMX address
TEST Activates the fixtures self test mode
AUDI ASLW Activates Sound-Active mode (slow)
AFST Activates Sound-Active mode (fast)
MSTR Runs fixture as “MASTER” for Audio, Master-Slave mode
SVPT Runs fixture as “SLAVE” for Audio, Master-Slave mode
SIZE
Room size adjustment (NORM-BIG-MIDL-SMAL) – This
adjustment is only functional when operating the fixture in
Sound-Active mode and makes adjustments to the pan and
tilt to coincide with a rooms dimensions
LAMP Manually switches lamp “on” and “off”
RESE Resets the fixture’s pan, tilt, and internal wheels
TIME POWR Displays the total fixture running time (non destructible)
LA1
Displays a lamps running time (erasable) – Reset this
reading after every lamp change to keep an accurate
account of a lamps running time
LA2 Displays the total lamp running time (non destructible)
FCOL Manually activates a continuous color wheel scroll
RPAN Reverses the Pan movements
RTLT Reverses the Tilts movements
SPEC MANU Manual drive of all device functions
PAN Pan Position, Channel 1
Tilt Tilt Position, Channel 3
COLO Color Wheel, Channel 5
SHUT Shutter, Channel 9
DIMR Dimmer, Channel 10
SPEC Special Functions, Channel 12
LAAU Automatic lamp start
DLOF Switch off lamp via DMX
DMXI Reed out actual DMX-values

D
O
W
N
-
U
P
DISP D ON Display On/Off
MODE ENTER UP DOWN
MO DE EN TE R UP DO WN
LED-Display
Mode-key Enter-key Down-key Up-key