Elation Professional Power Wash 250B - Manual (Page 23)

Power Wash 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 23
3.10.8 Adjustments and Calibrations (ADJU)
ADJU
With this function you can adjust and calibrate the positions of the different
wheels and other motors. This feature is reserved for a service technician
and is sometimes required after a service or repair work.
This function requires a service code only available to authorized service
technicians.
Use the Up and Down buttons to select the function that requires
calibration and press the Enter button to confirm the adjustment or the
Mode button to cancel and return to the menu. Use the Up and Down
buttons to set the adjustment values and confirm once more with the Enter
button or use the Mode button to cancel the operation.
Function Value Remark
COLO - 99 - + 99 Color wheel
CLRE Adjustments in the internal circuit.
FACC Must read ON
ARES Adjust- Reset
Authorized Personal
only. Refer to the
Service manual
3.10.9 Default Settings (DFSE)
DFSE
This function is used to restore all the factory default settings and presets.
Press the Enter button to confirm this operation or the Mode button to
cancel and return to the menu. When this operation is selected the LED will
briefly readout
ok , then return to the previous function. The chart below
details the factory defaults.
Function Display Default Settings
DMX Address D001 D001
Pan reverse RPAN ON OFF 
Tilt reverse RTLT ON OFF 
Automatic lamp on LAAU ON OFF 
Lamp on via DMX DLOF ON  OFF
Display DISP D ON 
Cooling fan FANS HIGH REG  LOOF LOHI
Feedback FEED ON  OFF