Elation Professional Power Wash 250B - Manual (Page 29)

Power Wash 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 29
6. Service and Maintenance
6.1 Lamp Change
To ensure a smooth operation, please follow these instructions carefully.
Safety Guidelines
• Always disconnect main power prior to performing any service
procedure!
• Caution: Always replace with the exact same type lamp, unless otherwise
specified by an authorized Elation
®
service technician. Replacing with anything
other than the specified part can damage your fixture and will void your
manufactures warranty.
• Warning: If you continue to blow lamps, STOP using the fixture. Contact
customer support for further instructions, you may have to return the unit for
service. Continuing to use the fixture may cause serious damage.
• Always allow ample time for the fixture to cool (approximately 20 minutes)
before attempting a lamp change.
• Never handle lamp with your bare hands as the oils from your skin may
damage the lamp
• Be sure to review all lamp handling and safety procedures on page 6
before attempting any lamp service.