Elation Professional Power Wash 250B - Manual (Page 32)

Power Wash 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 32
7. Fuse Replacement
Caution: Always replace with the exact same type fuse, unless otherwise specified by
an authorized Elation
®
service technician. Replacing with anything other than the
specified part can damage your unit and will void your manufactures warranty.
Warning: If you continue to blow fuses, STOP using the fixture. Contact customer
support for further instructions, you may have to return the unit for servicing. Continuing
to use the unit may cause serious damage.
Fuse Replacement: Locate and remove the unit’s power cord from the main power
supply. Once the cord has been removed located the fuse holder located on the side
panel of the near the power. Using a flat-head screwdriver remove the fuse holder from
its’ housing. Gently pull out the bad fuse and discard of it properly and replace with an
exact match. Reassemble in reverse order.