Secondary installation – Enviro C-11089 User Manual

Page 28

Advertising
background image

28

Secondary Installation

O

PTIONAL

B

ASE

S

HELF

& R

ISER

:

The Sonnet Base Shelf (15⁄8” (41 mm) high) and Base Shelf Riser (21⁄8” (54 mm) high) are black powder

coated components that can be combined to create a riser with an overall height of 2

3

/

16

” (55 mm).

This shelf can be installed with or without the riser and can be used when the hearth in front of the unit

is lower than the fireplace opening. Additional Base Shelf Risers can be fastened together to increase

the height in increments of 21⁄8” (54 mm). This Base Shelf may be used in conjunction with the Sonnet

Colonial & Classic surrounds with or without the Adjustable Surround, and it may also be used with the

Sonnet Trimmable Surround. The Base Shelf and Riser are sold separately.

Installation:
1. If unit is running, turn it off and

allow it to cool completely.

2. When using more than one riser

each level must be attached

using nine (9) #8 T-20 screws

provided (see Figure 56).

3. If installing with riser(s) the

Base Shelf is to be fastened

to the riser(s) with one T-20

screw at each end of the back

(see Figure 57).

Figure 56: Combining 2 Base Shelf

Riser.

Figure 57: Installing Base Shelf

onto Riser.

4. The leveling legs on the Sonnet may need to be adjusted to match

the height of the riser and shelf. Each leveling leg has two (2)

screws that can be loosened using a 1⁄4” hex driver (see Figure

29). Adjust the leg to the required height and then retighten the

screws.

5. Center the Base Shelf assembly in front of the unit flush with the

bottom of the unit.

6. Install surround if required.

I

NSTALLATION

OF

A

DJUSTABLE

S

URROUND

A

ND

T

RIM

:

Warning: The surround becomes hot when the unit is operating; ensure that the unit is turned off, and

that it has cooled to room temperature.
Kit Contents:

Colonial or Classic Trim

Quantity

Description

1

Trim Set (top, left, right, & bottom)

2

Hook Bracket (1 left & 1 right)

4

#8 Screw T-20

4 for 3 sided

8 for 4 sided

Corner Bracket

Please ensure that all components are supplied with this kit. If components are missing or have been

damaged, contact your dealer, distributor or courier company before starting this installation.

Adjustable Surround

Quantity

Description

2

Surround Corner - Large

2

Surround Corner - Small

16

#8 Screw T-20

4

Mounting Bracket

4

Mounting Bracket Back

1

Keystone & Cover Set

Advertising
This manual is related to the following products: