Hyundai HX300L - Manual (Page 92)

HX200/HX200L-2000/HX300/HX300L/HX400
5-8
5.1.4. R2-Axis Reduction Gear
■ Grease Replenishment
① Prepare a grease nipple A-PT1/4.
② Remove the grease outlet plug.
③ Remove the grease inlet plug and install grease nipple A-PT1/4.
④ Inject the grease into the grease inlet using a grease gun.
⑤ Wipe the outlet port with a cloth and reinstall the inlet/outlet plugs with seal
tape
■ Grease Replacement
① Prepare a grease nipple A-PT1/4.
② Remove the grease outlet plug.
③ Remove the grease inlet plug and install grease nipple A-PT1/4.
④ Inject the grease into the grease inlet using a grease gun.
⑤ The grease replacement is complete when new grease appears in the outlet
port. The new grease can be distinguished from the old one by color.
⑥ Wipe the outlet port with a cloth and reinstall the inlet/outlet plug with seal
tape.
Attention
Do not inject excessive grease. The excessive grease would cause
an abnormal operation.
Grease type : Molywhite RE00
Amount of grease : 250cc
Grease type : Molywhite RE00
Amount of grease : 1,100cc