HP vs80 - Manual (Page 2)

2 Notice hp StorageWorks vs80 1/8 autoloader
Notice
This document contains information that is protected
by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or
translated into another language. The information
contained in this document is subject to change
without notice.
Typographical Conventions and
Terms
Italics Menu choices and screens on the
autoloader.
[Bold]: Front panel keys to press on the
autoloader.
This table format indicates the menus you need to
enter on the autoloader front panel:
Note Notes explain significant concepts or
operating instructions.
Caution Cautions call attention to an operating
procedure or practice that could
damage the product if not correctly
performed. Do not proceed until you
understand and meet these required
conditions.
WARNING Warnings call attention to a procedure
or practice that could result in personal
injury if not correctly performed. Do
not proceed until you fully understand
and meet the required conditions.
In This Manual
Chapter 1 Installing the Autoloader:
Describes autoloader features,
autoloader accessories, and
installation tasks.
Chapter 2 Operating the Autoloader:
Describes the front panel menu
structure, menu tree, and drive and
tape operations.
Chapter 3 Autoloader Administration:
Describes how to configure the
autoloader, upgrade firmware,
and retrieve autoloader
information.
Chapter 4 Troubleshooting:
Describes how to identify and
troubleshoot autoloader problems
and resolve error conditions.
Appendix A Technical specifications:
Describes the environmental,
autoloader, drive, and media
specifications.
Appendix B Customer support:
Includes support information for
the autoloader.
Revision History
Edition 1 December 2001: C9265-90000
Initial release
Edition 2 September 2002: C9265-90001
Revised for rebranding updates.
Updates
For the most current version of this manual, and other
information regarding your tape autoloader, visit the
HP Customer Care web site:
http://www.hp.com/support/storage
Main Menu -> Command -> Import